Yes - even a brand-new Bethesda home needs an independent inspection. Montgomery County DPS inspects to minimum code and must approve a final before anyone moves in, but it doesn't check workmanship or who it serves - you. Hire your own inspector at the pre-drywall and final stages (about $400-$600 each, or $800-$2,000 for a full phased package) and again near month 11, before the builder's one-year workmanship warranty expires.
Quick Answer
Yes - even a brand-new Bethesda home needs an independent inspection. Montgomery County DPS inspects to minimum code and must approve a final before anyone moves in, but it doesn't check workmanship or who it serves - you. Hire your own inspector at the pre-drywall and final stages (about $400-$600 each, or $800-$2,000 for a full phased package) and again near month 11, before the builder's one-year workmanship warranty expires.
Bethesda's new construction market is busy right now - teardown-rebuilds across Bethesda and Chevy Chase, custom infill homes on older lots, and townhome and condo buildings going up around North Bethesda and the Pike District. If you're buying one of them, it's tempting to assume a brand-new home has nothing to inspect. That assumption quietly costs buyers money.
New doesn't mean flawless. Homes are built fast, by rotating crews, and the parts most likely to fail are the exact parts that get covered by drywall, insulation, and finishes before you ever walk through. A new construction home inspection is how you see those parts while they can still be fixed - and while the builder, not you, is the one on the hook for the repair.
Here's what the inspection actually covers, when to schedule each one, what it costs, and how to turn the report into leverage that protects you through closing and the first year of ownership.
What a new construction home inspection covers that the county doesn't
Every new home in Montgomery County is inspected by the Department of Permitting Services (DPS) as it goes up. DPS signs off on the footings, the house-location survey, framing close-in, insulation, and a final inspection that has to be approved before the home can be occupied - along with WSSC plumbing and gas finals and, where required, sprinkler, duct-blaster, and blower-door certifications.
That sounds thorough, and for code compliance it is. But a DPS inspection confirms the home meets minimum building code, nothing more, and the inspector doesn't work for you. The county isn't going to tell you the HVAC was sized wrong for the square footage, the attic insulation is thin in a few bays, the lot grades back toward the foundation, or the bathroom fan vents into the attic instead of outside.
That's the job of an independent inspector you hire - someone whose only client is you, and whose report answers one question: was this home actually built right, not just built to the legal floor? On a new build, the gap between "passes code" and "built right" is exactly where the expensive surprises live.
The three stages to inspect - and the one most buyers skip
A resale home gets a single inspection. New construction gives you up to three separate chances to catch problems, and each stage looks at something the next stage will cover up for good.
- Pre-drywall inspection. This happens after framing, wiring, plumbing, and ductwork are in but before insulation and drywall close the walls. It is the single most valuable inspection and the one most buyers skip - because once the drywall goes up, framing defects, missing fasteners, duct problems, and plumbing mistakes are sealed behind finished walls and cost a small fortune to reach. If you do nothing else, do this one.
- Final (pre-settlement) inspection. Scheduled near completion, before you sit down at settlement. It looks like a standard home inspection: roof, exterior, grading, the major systems, appliances, outlets, GFCI and smoke-detector safety items, and whether everything actually runs. It is separate from, and more useful than, the builder's orientation walkthrough of your finishes.
- Eleven-month warranty inspection. Most builders back their work with a one-year workmanship warranty. A full inspection at month 10 or 11 - after the home has lived through a full cycle of seasons and settling - catches cracks, leaks, sticking doors, and mechanical issues that only appear with use, so you can file them while that first-year coverage is still open.
You don't have to do all three, and plenty of buyers only do the pre-drywall and final. But if you do only one, make it the pre-drywall inspection. A few hundred dollars there protects you from five-figure repairs later.
On cost: in the Bethesda and broader DC-metro area, a single new-construction inspection usually runs about $400 to $600, and a full phased package covering three or four visits tends to land between $800 and $2,000, depending on the size of the home and how many stages you schedule. Against a $900,000 to $2,000,000 purchase, that is rounding error.
What inspectors actually find in new builds
Buyers are often surprised that a house nobody has ever lived in comes back with a punch list. Common findings on new construction in this market include:
- Framing that isn't properly braced, or missing joist hangers and fasteners
- HVAC ducts that are undersized, poorly sealed, or disconnected in the attic
- Plumbing leaks and drain lines that weren't finished correctly
- Thin, missing, or compressed insulation that will cost you in energy bills
- Roof flashing and attic ventilation installed wrong
- Grading and downspouts that push water toward the foundation instead of away from it
- Missing GFCI or AFCI protection, reversed outlets, and other electrical misses
- Bath and kitchen exhaust fans vented into the attic rather than to the exterior
None of this means your builder is cutting corners on purpose. It means a home is assembled quickly by a lot of different hands, and things get missed. The point of the inspection isn't to catch anyone - it's to create a documented list the builder fixes on their dime, before you own the problem.
How to handle builder pushback and warranty claims in Maryland
Some buyers worry the builder won't allow an outside inspector. In Maryland you have every right to hire your own, and reputable builders expect it. The move is to put inspection access in your contract up front - the right to a pre-drywall and a final inspection, with enough notice to schedule each one - so there is no debate later. Building in those rights is one of the first things I handle when a client is buying new construction in Bethesda.
Maryland law also gives you a statutory new home warranty: roughly one year on materials and workmanship, two years on the major systems - electrical, plumbing, heating, and cooling - and five years on load-bearing structural elements. Most national and regional builders extend the structural piece to ten years through a third-party warranty program, so the coverage you'll usually see described is a 1-2-10. Those windows are the whole reason the inspection timeline matters, and you can read how they work in my guide to the new construction builder warranty in Maryland.
When an inspection turns up defects, you have real leverage - most of all before settlement. The builder repairs the punch-list items, and if something can't be finished in time, you can ask for an escrow holdback so money stays in escrow until the work is actually done. The same approach I use to negotiate repairs after a home inspection on a resale applies here: the written report is what turns "the builder said they'd take care of it" into a commitment you can hold them to.
A new construction home inspection is cheap insurance on the largest purchase most people ever make. Spend a few hundred dollars per stage to protect yourself from defects that would cost thousands once the walls are closed and the warranty clock has run out.
Thinking about buying new construction around Bethesda? I help buyers write inspection rights into the contract, line up the right inspector at each stage, and hold the builder to the punch list through closing and the warranty year. If you're weighing a new build, reach out anytime and I'll walk you through exactly what to check and when.
